For those who have been playing with GNS3 1.0, a few tips that might make your experience little easier…
%AMDP2_FE-6-EXCESSCOLL:Ethernet0/2 TDR=0, TRC=0
This command annoys you when you start switching. Its basically the same syslogs GNS3 pre 1.0 shot at us saying “invalid duplex/speed”. Unfort the fix isnt as straight forward as we did in the past. I found an article online on how to hide this error.
logging discriminator EXCESS severity drops 6 msg-body drops inc EXCESSCOLL
logging buffered 50000
logging console discriminator EXCESS